Baptist Health UDI Capture Work Group Case Study
WORK GROUP TITLE:
UDI Capture Work Group
CASE STUDY PARTICIPANTS:
• Tonya Gilliam and Lana Glover, EPIC Team
• Terry Hays and Alex Monday, IT Team
• Doug Barnhart, OR Team
• Tom Stenger, Johnny Dennis and Justin Holstead, Supply Chain Team
• Lorette Hefley, Revenue Cycle Team
CASE STUDY ORGANIZATION:
Baptist Health is an Arkansas-based, locally owned and managed, not-for-profit, and faith-based healthcare organization. Baptist Health is also Arkansas’ most comprehensive healthcare organization with more than 9,100 employees operating nine hospitals. The health system includes the state’s largest primary-care physician network, the state’s leading rehabilitation hospital and outpatient therapy centers, the state’s most comprehensive 400-resident retirement village, and the state’s largest schools of nursing and allied health, plus wellness centers and a home health network.
The project objectives are to integrate supply chain information across all systems into one point of entry, interface data to all systems that use that data, and then define the fields and the processes that use that data. The data fields are: United Nations Standard Products and Services Code® (UNSPSC®), Healthcare Common Procedure Coding System (HCPCS) codes and GS1 Global Trade Identification Numbers (GTIN)1,2. With this system and data integration in place, a clinician can scan a product’s barcode(s) at the point of use so that the product’s device identifier (DIs)3, UNSPSC, HCPCS code and all other accessible attributes are captured and transferred to the connected systems to facilitate documentation in the patient medical record, charge capture, patient billing, inventory management, and manufacturer transactions (POs, payments, etc.). The primary benefits are better reporting by physician, increased reimbursement, and improved track-ability of recalls.
DATE INITIATIVE WAS IMPLEMENTED (MONTH/YEAR):
On May 1, 2017, Baptist Health’s operating rooms (OR) began scanning product data via barcode into the health system’s EPIC electronic health record (EHR) system.
CHALLENGES TO IMPLEMENTING A UDI CAPTURE SOLUTION:
Clinicians have questioned which barcode on the product packaging to scan when there are multiple barcodes. To address this issue, Stenger developed a “tip sheet” to help them with the process (see the Training Documents section). If there is more than one barcode, the clinician is instructed to start with one and then scan the others since each barcode might contain different information.
“It works well and it takes less than a few seconds to scan all of the barcodes,” said Stenger.
Supply Chain, IT Team, Epic Team, OR Team and Revenue Cycle Team
Baptist Health uses it’s Infor Lawson® enterprise resource planning (ERP) system item master to house its standardized and enriched product data. The team sorted their item master data by manufacturer, product code and description and added the UNSPSCs. From there, they sorted products by UNSPSC, manufacturer and manufacturer item number to put like products together and assigned each product a HCPCS code, which they obtained from Healthcare IQ, an independent data management and analytics company, and from their group purchasing organization (GPO) Vizient. Next, the team used a Sequel interface to pull DIs for products from the U.S. Food and Drug Administration’s (FDA) Global UDI Database (GUDID).
To date (May 15, 2017) Baptist Health has in its item master:
- 101,000 total products
- UNSPSCs for 90,400 products
- HCPCS codes for 73,000 products
- DIs for 63,000 products
The team built an interface from the ERP system to its EPIC electronic health record (EHR) system to facilitate the flow of product data from the item master to the patients’ electronic medical records. They have also integrated the ERP and EHR systems with the health system’s Champion Healthcare Technologies UDITracker® OR tissue tracking system. All three systems – ERP, EHR and tissue tracking have integrated barcode scanners.
“The OR staff loves it because they can focus more time on the patient instead of data entry,” said Stenger. “Before they were keying in serial numbers, charge codes and other fields. Now they scan the barcode(s) and all of that information pops up in literally two seconds.”
TECHNOLOGY USED OR IMPLEMENTED AS A RESULT OF THIS INITIATIVE:
Symbol brand scanners and are on:
- EPIC EHR 2015 IU 2
- Infor Lawson ERP version 10.06
- Champion Healthcare Technologies UDITracker® OR
- Securing consensus on the strategy and tasks the team wanted to complete.
- Having stakeholders that own their process and the desire to be successful.
- Taking a holistic approach to data management and making sure item master data is complete.
ESTIMATED COSTS AND ROI:
Baptist Health Supply Chain Analysts spent 120 hours adding the 20,000 new UNSPSC codes to Lawson, which equates to approximately $6,000 in labor costs (120 x $50/hour = $6,000). Based on the need to remain current with market changes, an estimated $12,000 should be budgeted for ongoing costs. Costs for Vizient and IQ were omitted, due to stand-alone project expenses.
Feeding UNSPC data into Baptist Health’s cost accounting system will require an estimated 80 IT Analyst hours, which equates to approximately $6,000 in labor costs (80 hours x $75/hour = $6,000). This decision is still pending.
All facilities utilize HCPCS and there were 40,000 enumerated across the health system. Stenger and his team identified an additional 30,000 codes by sorting items by manufacturer, manufacturer item number and UNSPSC. HCPCS codes are utilized in outpatient billing to obtain carve out revenue paid only if HCPCS are computed on the bill. This will aid in funding the project.
The UNSPSC is not needed to code HCPCS, but acts as another point of confirmation. If counted HCPCs are identified, a table can be created to track actual charges. An agreed upon factor can then be applied to compute level of improved reimbursement. HCPCS are not required to establish DIs. However, DIs can link HCPCS and UNSPSC, which improves consistency in reporting and charging. If a DI is scanned, it will be documented with the other attributes. Then the potential add process can review it. To complete this task will require an estimated 80 hours of IT Analyst time, which equates to approximately $6,000 in labor costs (80 hours x $75/hour = $6,000).
OpTime Activity Report and Potential Item Add Report:
Stenger and his team are considering the development of an OpTime Activity Report that would pull all OpTime item fields and Lawson ERP data fields, combine this information, and integrate it with data from the GUDID, thus optimizing information across systems.
In addition, the team would develop a Potential Item Add Report comprised of items not contained within the ERP system. A utilization review team would review these items and determine if they should be added to the ERP system. If any of these item changes could potentially impact revenue, the items would then be added to a Charge Consistency Report (see below). The fields required are DIs, description, manufacturer number, manufacturer name, charge code, HCPCS, revenue code and charge amount. All of the information in these fields resides in the EHR and ERP systems. To complete this task would require an estimated 80 IT Analyst hours, which equates to approximately $6,000 in labor costs (80 hours x $75/hour = $6,000).
Charge Consistency Report:
Stenger and his team are also developing a Charge Consistency Report, which is a table containing HCPCs that have been created or changed so they can periodically run a report of outpatient charges on those items. To calculate return on investment (ROI) from this project, Stenger and his team would have to establish an agreed upon factor on which to measure the additional revenue and project impact. They would then use this output to analyze the impact on revenue. This task would require an estimated 40 IT Analyst hours, which equates to approximately $3,000 in labor costs (40 hours x $75/hour = $3,000).
The first year project costs are projected at $60,600, with ongoing costs of $18,000. The Baptist Health team believes the project should pay for itself in less than six months.
Estimated Costs and ROI Next Steps:
They also plan to run EHR reports on case costs compared by case and physicians, set metrics to measure them and then evaluate the impact of practice pattern changes. This has yet to be developed.
Stenger explains that the DI unit of measure is “ambiguous” since manufacturers and healthcare providers often refer to a product’s UOM in different ways, For example, what a manufacturer calls a “case,” a provider could call a “box.” Because a manufacturer assigns a DI to each of its products’ UOM, Stenger needed a way to ensure Baptist Health’s item master contained the correct DI for the UOMs consumed by the organization.
“What you call a case, I could call a box but the fact that we both know there are 100 items in it means we know we are talking about the same thing,” said Stenger. “So I started with the primary level “A”, the individual item or “each,” and assigned that a sequence of “1.” Then I walked my way up the DI tree. If UOM “B” contains “A” then “B” becomes “2” in the sequence, and if “C” contains “B” then “C” becomes “3” in the sequence, and so forth. That way, I assigned DIs for only those product UOMs that we have in the item master, and didn't have to use the whole ‘tree’ of DIs. I was able to pull out and use only those parts of the DI tree that we needed.”
“Our philosophy is one of continual improvement,” said Stenger. “We challenge all process owners to improve their process. We will pilot any suggestion that gains group consensus, yet not all are fully integrated.”
Stenger and his team are now exploring other areas where clinicians could benefit from capturing product DIs via barcode scanning, such as the intensive care unit (ICU) and Cath Labs. Furthermore, the Baptist Health Revenue Cycle team is reviewing and monitoring the HCPCS codes to evaluate their impact on patient revenue. The health system is also considering how they can use the captured product data in the future, to monitor not only case costs but also clinical efficacy.
1 An FDA-accredited issuing agency (IA) is an organization that operates a system for assignment of UDIs according to the UDI Rule. FDA has accredited three issuing agencies – GS1, HIBCC and ICCBBA.
2 Each issuing agency has an alternative name (aka) for the DI of UDI. The aka name used by each issuing agency is listed below:
- GS1 – Global Trade Identification Number (GTIN)
- HIBCC – Universal Product Number (UPN)
- ICCBBA – Processor Product Identification Code (PPIC)
3 AA UDI consists of two parts: (1) a device identifier (DI), which is the mandatory, fixed portion of a UDI that corresponds to the model or version of a device; and (2) a production identifier (PI), which is the variable portion of a UDI that identifies one or more of the following when included on the label of a device: lot/batch number, serial number, expiration date, manufacturing date, and donor identification number. http://bit.ly/2tewrRi